1.
Look for the drive model you have in the
duplicator by going to:
-
Scroll down to
“Setup” or “Utilities”, then press the ENT button
-
Scroll down to “Device Info”, then press ENT
button
-
Scroll down once
(1 Burner duplicator) and Scroll down twice
(2 burner or more), then press the ENT button
-
Take note
of the model number.
-
Then press ESC
all the way to Setup
2.
Install the Lightscribe in your computer:
-
Insert the Lightscribe software that came with
the duplicator
-
Agree on the License Agreement window
-
Enter the User, Company Name and Serial Key
-
Click on “Next”
-
Select the model number you have. Make sure it’s
the only model number selected.
-
Click on “Install”
-
Then click on “Finish“ after the installation
3.
Run the Lightscribe Template Labeler Software
by:
-
Windows XP (Double-click
on the Lightscribe Software)
-
Windows Vista & 7 (Right-click on the Lightscribe Software, then select “Run as administrator”
4.
Once the Lightscribe Software is running:
-
Select a template you want to use. If you want
to use a different template you click on “Get more template” and download the
template.
-
After selecting the template you want to use, go
ahead and insert the picture and text you desired.
-
Once the design is done, go ahead and press the
“Next” button
-
Make sure the Drive (At the top left) is set to “Lightscribe Duplicator Label Writer”
-
Click on “Print
and Preview”
-
Save the file. Make sure it is saved as an .LSI file.
-
Locate the file where you saved it, then “Right-click” on the file and select “Properties”. Make sure the size of the
file is in MB (Megabytes).
5.
After check on the file size, Burn the file in a
CD:
-
Right-click on the LSI file that you created,
then select “Send to”
-
Select the CD
or DVD drive in your computer.
-
Insert a blank
CD in your computer. It will open a new window asking you on what to do
with the CD.
Note: Make sure to insert a
blank CD-R
a. Windows XP
(1)
A message at the bottom right hand of the screen
saying “Files waiting to be written”,
go ahead and click on the message
(2)
A new window will come up with the file that you
want to burn, select the “Write these
files to a cd” located at the left side of the screen.
(3)
Then continue following the wizard. Once done
the tray should come out by itself.
b. Windows Vista
(1)
You will see a box open that reads "Prepare this blank disk"
(2)
On the left corner click on "Show formatting options"
(3)
Select the Mastered
option then click next.
(4)
On the top of the browser box, click on the
redish circle.
(5)
Click next, etc. to burn.
c. Windows 7
(1)
You will see a box open
(2)
Select the Cd/DVD
Player option, (Compatible with the majority of players) then click next.
(3)
On the top of the browser box, click on the
redish circle. (Burn to Disk)
(4)
Click next, etc. to burn.
6.
Once the .LSI file is burned into the CD, Place
the CD at the very top drive (Source Drive) of the duplicator.
7.
Insert a Lightscribe Disc below the source
drive. Place them upside down (Label down).
8.
Scroll to “Lightscribe”
then press ENT. Press ENT again on “Print”
Or
scroll to “Print” option then
press ENT.
